Oldsmobile 2001 Silhouette User Manual

Page 116

Advertising
background image

2-24

When your vehicle was shipped from the factory, it was
programmed in Mode 4. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Turn the parking lamps on, then off.

3. Count the number of chimes you hear. The number

of chimes indicates the vehicle’s current programmed
mode. (If you do not wish to change the current
mode, you can either exit the programming mode
by following the instructions later in this section or
program the next feature available on your vehicle.)

4. Turn the parking lamps on, then off to change the

current mode.

5. Turn the parking lamps on, then off until you hear

the number of chimes corresponding to the mode
selection you want.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Arming and Disarming the Content
Theft-Deterrent System

To arm and disarm the content theft

-

deterrent system,

the system must be turned on using Modes 1, 2 or 4
listed previously in this section under “Content
Theft

-

Deterrent System.”

With the arming and disarming feature, you can program
the vehicle to do the following:
D Arm the system when you lock the doors using either

power door lock switch while any door or the liftgate
is open and the key is removed from the ignition.

D Arm the system when you lock the doors with your

key or remote keyless entry transmitter and the key
is removed from the ignition.

D Disarm the system when you unlock the doors with

your key or remote keyless entry transmitter.

Advertising