Subaru 2009 Impreza User Manual
Page 272
7-52
Starting and operating
desired speed, press the
“SET/COAST”
button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
& Cruise control indicator light
Turbo models
Non-turbo models
The cruise control indicator light illumi-
nates when the ignition switch is turned to
the
“ON” position and turns off after
approximately 3 seconds.
The light illuminates when the
“CRUISE”
main switch is pressed.
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch
“ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the
“ON” position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator lamp flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
& Cruise control set indicator
light
Turbo models