Subaru 2004 Legacy User Manual

Page 194

Advertising
background image

4-15

Climate control

CONTINUED

T

– Fan speed control switch

1) Fan speed control switch

The fan speed control switch has the 5 positions:

AUTO position and 4 different fan speed positions.

With the fan speed control switch in the AUTO posi-

tion, the fan speed changes automatically correspond-

ing to various conditions: air temperature inside and

outside of the passenger compartment, intensity of the

sunlight, etc.

Use this switch to select desired fan speed. Fan speed

increases with each press of the switch and returns to

the AUTO position.

T A/C – Air conditioner switch

NOTE

The air conditioner compressor does not operate

when the outside air temperature is below 32

°F

(0

°C).

If the windshield starts to fog when the air conditioner

is operated in the AUTO mode, push the air condition-

er switch “A/C” to defog and dehumidify.

When this switch is pushed, the air conditioner com-

pressor turns on and the indicator light “A/C” on the

control panel comes on. After eliminating the fogging

from the windshield, set the air conditioner back in the

AUTO mode by pushing the “AUTO” switch.

T MODE – Air flow control switch

(Ventilation): Air flows through the instrument pan-

el outlets.

(Bi-level): Air flows through the instrument panel

outlets and the foot outlets.

(Heat): Air flows through the foot outlets and

some through the windshield defroster outlets.

1

AUTO

1

2

3

4

UB5021BB

Advertising
This manual is related to the following products: