Subaru 2004 Legacy User Manual

Page 294

Advertising
background image

7-21

Starting and operating

CONTINUED

Automatic transmission (with

SPORTSHIFT mode – 2.5GT,

2.5GTLO)

Do not shift from the “P” or “N” position into

the “D”, “3”, “2”, “1” or “R” position while de-

pressing the accelerator pedal. This may cause

the vehicle to jump forward or backward.

y

Shift into the “P” or “R” position only after

the vehicle is completely stopped. Shifting

while the vehicle is moving may cause damage

to the transmission.
y

Do not race the engine for more than five sec-

onds in any position except the “N” or “P” po-

sition when the brake is set or when wheel

blocks are used. This may cause the automatic

transmission fluid to overheat.
y

Avoid shifting from one of the forward driving

positions into the “R” position or vice versa un-

til the vehicle has completely stopped. Such

shifting may cause damage to the transmis-

sion.

The automatic transmission is electronically controlled

with 4-forward speeds and 1-reverse speed. Also, it

has a SPORTSHIFT mode.

NOTE

Immediately after a disconnected battery is recon-

nected or ATF (automatic transmission fluid) is re-

placed, you may feel that the automatic transmis-

sion operation is somewhat unusual.

This results from erasure or invalidation of data

which the on-board computer has collected and

stored in memory to allow the transmission to

shift at the most appropriate times for the current

condition of your vehicle. Optimized shifting will

be restored as the vehicle continues to be driven

for a while.

Advertising
This manual is related to the following products: