Subaru 2004 Legacy User Manual

Page 259

Advertising
background image

6-14

Interior equipment

1-888-ONSTAR7 (888-667-8277).

„

OnStar services button

Press this button, and you will be connected to an On-

Star Advisor. You will hear a chime, followed by the

words “Connecting to OnStar”. The connection pro-

cess will normally take about 15 seconds. Your sys-

tem is equipped with backup connection retry capabil-

ities. If you do not immediately connect to OnStar, DO

NOT DISCONNECT. A series of retry attempts will be

made automatically. If you wish to cancel your call to

the OnStar center, simply press the OnStar Communi-

cation button.

„

OnStar emergency button

In an emergency, press this button to connect with an

OnStar Advisor. Your call will be given the highest pri-

ority, and you will hear a chime followed by the words

“Connecting to OnStar Emergency.” The Advisor will

attempt to locate your vehicle, find out what kind of as-

sistance you require, and contact a nearby emergency

services provider who can dispatch ambulance, fire,

police or other emergency services. Please use this

button only for true emergencies. If you press this but-

ton by mistake, please stay on the line and tell the ad-

visor that there is no emergency.

„

OnStar communication button

(White DOT)

Press this button at the end of a call. You’ll hear the

words “OnStar Request Ended.” Also, press this but-

ton to answer a call from the OnStar Center, or cancel

a call if one of the other buttons is accidentally

pressed. This button is also used to access OnStar

Personal Calling and Virtual Advisor services, if those

services have been activated.

„

System status light

y

Solid green – Indicates the OnStar system in the

vehicle is powered ON and ready to make or receive

calls.
y

Blinking green – The light blinks green to indicate

a call is being connected or in progress. If you notice

this light blinking while you are not on a call, press the

OnStar Communication (white dot) button.
y

Red – This signals that your OnStar system may not

be functioning properly. Press the OnStar button to at-

tempt to contact an OnStar advisor. If the connection

is made, the advisor will assist you in making sure your

OnStar system is operating properly. If you cannot

contact the OnStar Center, please take your vehicle to

the nearest SUBARU dealership for diagnosis and

service.

Advertising
This manual is related to the following products: