License plate light, J license plate light – Subaru 2002 Impreza User Manual

Page 362

Advertising
background image

IMPREZA(NA) A1830BE-A (ENGLISH)

11

Maintenance and service

11-65

– CONTINUED –

HGB015CB

1) Tail/stop light
2) Rear turn signal light
3) Backup light
4) Rear side marker light

3. Remove the bulb holder from the rear combina-
tion light assembly by turning it counterclockwise.
4. Remove the bulb from the socket by pushing it
and turning counterclockwise. Install a new bulb.
5. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
6. Close the cover and latch the lock.
7. Reinstall the rear combination light assembly and
its side cover.

J License plate light

HGF012FA

1. Remove the mounting screws using a phillips
screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.

Advertising