Denon DHT-M330DV - Manual (Page 27)

<TAPE> <MD>
Use as analog
input/output connector
MD function.
Use analog input/output
connectors (TAPE) and
digital input connector
(TV/AUX1) as the
TV/AUX1 function.
27
ENGLISH
(1) Quick setup procedure
• Generally used system settings have already been made on the DHT-M330DV upon shipment from the factory, so the DHT-M330DV can be
used as such if there is no need to make changes to the system.
• In the cases described below, use the Quick Setup function to make the system settings before using the DHT-M330DV.
q When expanding the system configuration to a 6.1- or 7.1-channel system (see page 13, 47, 48)
w When installing the speakers in a large room (select at “ROOM SETUP” below)
e When setting the TAPE function to the TV/AUX1 function and connecting both the digital and analog inputs (set “FUNC. SETUP” below to
“TV/AUX1”).
1 Turn off the power.
• The standby mode is set and the power indicator turns red.
4 2, 3 1
Remote control unit
<5.1CH>
Quick system settings :Factory default
Setup
Speaker
configuration
SPEAKER SETUP
Room settings
ROOM SETUP
Function settings
FUNC. SETUP
Select the speaker configuration you
plan to use.
Select the speaker installation space.
Select the TAPE or MD function
(analog input/output connectors only)
or the TV/AUX1 function (analog
input/output connectors and digital
input connectors).
Settings <>: Display
S (3.6X4.5)
Equivalent to 3.6 x 4.5
meters
2 front channels
Center channel
2 surround channels
Subwoofer channel
<6.1CH>
2 front channels
Center channel
2 surround channels
Surround back channel
Subwoofer channel
<7.1CH>
2 front channels
Center channel
2 surround channels
2 surround back channels
Subwoofer channel
M (4.5X5.4)
Equivalent to 4.5 x 5.4
meters
L (6.0X6.0)
Equivalent to 6.0 x 6.0
meters
<TV/AUX1>
Use as analog
input/output connector
TAPE function.
Quick Setup procedure
Main unit
2 Press the MENU/SET button for at least
2 seconds.
• The display lights and “QUICK
SETUP” is displayed.
Main unit
3 The items you want to set are displayed
each time the MENU/SET button is
pressed (for less than 1 second).
• The item changes each time the
button is pressed, as follows:
Main unit
SPEAKER SETUP ROOM SETUP
FUNC.SETUP (END)
• After one second, the currently set
value is displayed.
4 Use the select 0 and 1 buttons to select the item you want
to set.
• If you do not want to change the value, press the
MENU/SET button to continue.
Main unit
5 After going once through pressing the
MENU/SET button, the DHT-M330DV is
set back to the standby mode.
1
8 SETTING UP THE SYSTEM
Red