Denon DHT-M330DV User Manual
Page 38
38
ENGLISH
(5) Playback using the Dolby Headphone mode
• The AVR-M330 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
• The Dolby Headphone mode is set when headphones are connected to the AVR-M330’s headphones jack.
• There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).
• The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema
and Music modes can be selected with the 2-channel mode setting.
1
2
3
2
3
3
1
Connect headphones (sold separately) to the headphones
jack.
• When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
PHONES
2
Press the surround parameter button and display the
surround parameters.
Main unit
Remote control unit
3
Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
• Dolby H mode setting
DH2
DH3
BYPASS
,
/
DH1
• 2-channel mode setting
To play with normal two-channel stereo, select the “STEREO” or
“DIRECT” mode using the surround mode switch.
When using headphones, the mode switches as follows each time
the surround mode button is pressed:
<
H
D
>
1
H
<
N
C I
E M
A
>
Main unit
Remote control unit
DOLBY H
DIRECT
STEREO
Surround parameters (3)
DOLBY H (Dolby Headphone modes)
DH1 ..............Reference room
(small room with little reverberation)
DH2 ..............Live room
(room with more reverberation than DH1)
DH3 ..............Large room
(Larger room than DH1. Use this mode to achieve a
sense of distance and diffusion of the sound.)
BYPASS ........Stereo playback.
2-channel modes
These can be selected when playing 2-channel sources (analog,
PCM, etc.). The signals are processed by one of the following
decoders to achieve multiple channels then played in the Dolby
Headphone mode.
In the Bypass mode, these are not displayed.
CINEMA .......Dolby Pro Logic
II
Cinema mode
MUSIC ..........Dolby Pro Logic
II
Music mode
MUSIC
CINEMA
• Operate the remote control unit at the “AMP” position.
Set the remote
control selector
switches
Switch1 to DVD
Switch2 to AMP