ABUS Technologies SV 8 Series Indicator / Controller - Manual (Page 9)

ABUS TECHNOLOGIES INC.
9
SV-8
8. OPERATION
Example for usage
1. Used with 2 wire transmitter. The instrument can supply DC 24V auxiliary power and isolate
analogue output 4~20mA. Select input signal mA.
2. Used with pressure sensor. The instrument can supply DC 12V auxiliary power, and the sensor
output is 2mV/V. Select input signal mV.
9. MAINTENANCE
Troubleshooting
INFORMATION SPECIFICATIONS ELIMINATE
Sensor not connected or input
signal is too low.
Check and connect the sensor
properly, or reset the low alarm value.
Check the parameters FL1 and FH1.
Sensor not connected or input
signal is too high.
Check and connect the sensor
properly, or reset the high alarm value.
Check the parameters FL1 and FH1.