ABUS Technologies MPT Melt Pressure Transmitter - Manual (Page 4)

ABUS TECHNOLOGIES INC.
4
MPT
1. INTRODUCTION
The MPT-P&T Series transmitter is a +/- 1.0% accuracy sensor ideal for general
purpose melt pressure measurements requiring simple installation, repeatability and
reliability. The MPT-P&T transmitters provide the industry standard 4 - 20 mA amplified
signal designed to work with Recording Indicators and PLCs. The MPT-P&T comes
equipped with adjustable zero and span ports. Optional thermocouple or RTD
configurations are available to provide melt temperature. The MPT-P&T features a 1/2-20
UNF thread for installation in standard transducer mounting holes and can be supplied with
a variety of electrical connections.
2. PRESENTATION
2.1 Features
1. Adjustable zero and span
2. Stainless steel wetted parts
3. 0 - 500 to 0 - 10,000 psi
4. Accuracy better than +/- 1.0%
5. 4 - 20 mA outputs
6. Internal 80% shunt calibration
7. Repeatable, reliable pressure measurements
8. Superior abrasion resistance
9. Direct input to supervisory control systems
10. Easy to install and set-up
11. Wide variety of pressure and temperature combination.
2.2 Technical Parameters
Range: 0~10 bar – 2000 bar, (0~150 PSI – 30000 PSI)
Accuracy: ± 0.50 % FS , ± 1 .0 % FS
Power: 10Vdc
Output: 1.5mV/V, 2mV/V, 2.5 mV/V, 3.33 mV/V
Load resistance: 350 ohms±10%
Shunt calibration: 80%±1%
Overload: 1.5×FS
Repeatability: ±0.2%FS
Thermocouple: PT 100; E; J; K
Max diaphragm temp: Up to 500 °C
Process connection 1/2″- 20UNF, M14×1.5, M18×1.5, M22, G3/4
Electronic connection: 6-pin or 8-pin along with connector and cable.