Troubleshooting, Specifications, English – Denon DN-C615 User Manual
Page 15
15
ENGLISH
13
TROUBLESHOOTING
Make sure of the followings before you consider as any malfunctions :
1. Are all the connections correct?
2. Are all system components being operated correctly in accordance with the operating instructions?
3. Are the speakers and amplifier/receiver functioning correctly?
If the tape deck still does not function properly, check the symptom against the list below. If the symptom does
not correspond to the check list, please contact your DENON dealer.
Problem
Cause
Remedy
Disc holder does not open/close.
• Power operation switch is not
turned on.
• Turn the power operation switch
on.
When a disc is loaded, “TOC Error”
or “No Disc” is displayed.
• Disc is not properly loaded.
• Reload the disc.
When the PLAY (
1
) button is
pressed, playback does not start.
• Disc is dirty or scratched.
• Clean the disc.
There is no sound, or it is distorted. • Output cord is not properly
connected.
• Amplifier adjustment is
inappropriate.
• Connect the output cord properly.
• Readjust the amplifier.
A specific section of the disc will
not play.
• Disc is dirty or scratched.
• Clean the disc.
Programmed playback does not
work.
• Programmed playback operation
has been performed improperly.
• Restart programmed playback.
2 CD SECTION
Type :
Single-mechanism compact disc player
Audio Channel :
2 channel stereo
Quantization :
16-bit Liner
Sampling Frequency :
44.1 kHz at Normal Pitch
Oversampling Ratio :
8 times
Frequency Response :
20 to 20,000 Hz
Total Harmonic Distortion :
0.007 %
Signal-to-noise Ratio :
107 dB
Dynamic Range :
98 dB
Channel Separation :
90 dB
Analog Output :
RCA jack
Output Level :
2.0 V at 0 dB disc
Load Impedance :
10 k
Ω
/ kohms or more
Digital Output :
RCA jack
Signal Format :
SPDIF or IEC-958 Type II
Variable Pitch Control :
±12 % max.
Frame Search Accuracy :
1/75 second
Discs :
Standard compact discs (12 cm and 8 cm)
CD Mechanism Service Life :
1000 hours (continuous playback)
2 REMOTE
Wired Remote Control Connection (Stereo mini jack)
Remote Control Sensor
2 GENERAL
Headphone Output :
Stereo
Outputs Level :
410 mW
Load Impedance :
33
Ω
/ ohms
Power supply :
120 V AC ±10 %, 60 Hz (for U.S.A. & Canada models)
230 V AC ±10 %, 50 Hz (for European & U.K. models)
Power Consumption :
13 W
Dimensions :
482 (W) x 88 (H) x 280 (D) mm
Installation :
19-inch rack mountable (2U)
Mass :
4.7 kg
✽ For improvement purposes, specifications and design are subject to change without notice.
14
SPECIFICATIONS