Alto Professional MS8 - Manual (Page 16)

14
MS8A
2-way Bi-Amp, with MODELLER
350W-LOW CLASS D/65W-HIGH
MODELLER presets setting
120dB Continuous/123dB Peak (Calculated)
70 x 70 nominal
8" Woofer, 1.5"voice coil, with double ventilation
1" Neodymium on Spherical Horn (Tractrix contour)
2KHz under analog processor
LINE-COMBO/ LINK-XLR-F Balanced (15kohm)
Line +0dB
MODELLER with 16 Preset / Volume Control/ Power ON with
Green LED/ Clip Limiter with Red LED/ Ground Lift.
120-240 Volt, in Switching Power mode.
MDF wood cabinet, glued and reinforced, black painted, one metal
handle and rubber foot.
Two point for suspension, one metal pole-mount, optional bracket.
493 x 304 x 293 mm (19.41" x 11.97 x 11.54")
12.06kg / 26.53 lbs
14.56kg / 32.03 lbs
CLASS AB in EIAJ
200W-LOW CLASS D/35W-HI CLASS AB in Continuous
Active System Type
Power System
Frequency Response
Maximum SPL @ 1m
Coverage (HxV)
Transducer Low
Transducer High
Active Crossover
Input Connector
Input Sensitivity
External Control
Power Supply
Enclosure Construction
Mounting / Suspension
Dimensions (HxWxD)
Net Weight
Shipping Weight
8" 2-way Active Modelling Loudspeaker
MS8 8" 2-way Passive Speaker Cabinet
2-way Passive
150W continuous / 300W peak
67Hz-18kHz
94.5dB SPL
8 (nominal)
116dB continuous/119dB peak (Calculated)
70 x 70 nominal
8" Woofer, 1.5"voice coil, with double ventilation
1" Neodymium on Spherical Horn (Tractrix contour)
2.25kHz at 12dB/oct, with HF protection
Two Parallel SPK NL-4 for INPUT/ THRU
MDF wood cabinet, glued and reinforced, black painted;
one metal handle and rubber foot.
Two point for suspension , one standard pole-mount plus a
optional bracket.
493 x 304 x 293 mm (19.41" x 11.97 x 11.54")
11.29kg / 24.84 lbs
13.79 kg / 30.34 lbs
Passive System Type
Power System
Frequency Response (-10dB)
Sensitivity (1w @ 1mt)
Impedance:
Maximum SPL @ 1m
Coverage (HxV)
Transducer Low
Transducer High
Passive Crossover
Input Connectors
Enclosure Construction
Mounting / Suspension
Dimensions (HxWxD)
Net Weight
Shipping weight
SPO
TLIGHT
9. TECHNICAL SPECIFICATION