Alto Professional TMX200DFX User Manual
Page 4
4
8.
HI EQ (TREBLE) –
Adjusts the high (treble)
frequencies of the channel.
9.
MID EQ – Adjusts the mid-
range frequencies of the
channel.
10.
MID FREQUENCY
SELECTOR – Adjusts the
frequency band affected
by the MID EQ knob.
11.
LOW EQ (BASS) –
Adjusts the low (bass)
frequencies of the channel.
12.
AUX SEND CHANNEL
VOLUME – Adjusts the
audio level sent from that
channel to the Aux
Channel (which is sent out
the AUX SENDS and
controlled by the AUX
SENDS VOLUME knobs).
The top two knobs can
adjust the pre- or post-
fader levels (as
determined by the AUX
PRE-/POST-FADER
SWITCH). The bottom two
knobs can adjust the level
of the signal sent to the
mixer's effects processor.
13.
AUX PRE-/POST-FADER
SWITCH – When the
button is depressed, the
audio sent to the AUX
SENDS is taken before the
channel's fader. When the
button is raised, the audio
sent to the AUX SENDS is
taken after the channel's
fader.
14.
CHANNEL PAN /
BALANCE – If this knob is
labeled "PAN," it adjusts
the (mono) channel's
position in the stereo field.
If the knob is labeled
"BAL," it adjusts the
balance between the two
mono channels of that
stereo signal.
15.
CHANNEL MUTE – Press
this button to mute/unmute
the channel. The
channel's audio will only
be sent to its INSERT or
heard in the Solo Channel
when its SOLO button is
depressed.
16.
PFL – When this button is depressed, the pre-fader audio will be heard in the Solo Channel, which will become
the only audio sent to the PHONES outputs and CTRL OUTS. The LED METERS will also display the audio
levels, which are controlled by the PHONES and CTRL ROOM volume knobs.
17.
PEAK LED – The LED will flash if the signal is clipping. If this happens, decrease the setting of the GAIN knob
or CHANNEL FADER.
18.
CHANNEL FADER – Adjusts the audio level on the channel.
19.
2-TRACK INPUTS – You may connect these inputs to the outputs of an external sound source using a
standard stereo RCA cable (sold separately). You can send this channel to the Solo Channel (using the CTRL
ROOM SOURCE "2 TK IN" switch) and/or the main mix (using the 2TK TO MIX switch).
19
19 20
21
21
22
22
22
22
24
24
25
25
25
25
23
23
26
27
28
29
30
30
31
31
32
32
36
36
37
37
38
38
38
38
38
38
38
42
42
42
42
40
40
40
40
40
40
40
43
44
45
46
47
48
49
40
41
41
41
41
41
41
41
38
39
39
40
40
33
33
34
34
35
35
28
21
21
20