Alto Professional TMX200DFX - Manual (Page 44)

44
TECHNICAL SPECIFICATIONS
MONO INPUT CHANNELS:
Microphone inputs (electronically balanced, discrete input configuration)
Frequency response: 10 Hz – 55 kHz, ±3 dB
THD+N: 0.005% at + 4 dBu, 1 kHz
Gain range: 0 dB to 45 dB (MIC)
SNR: 115 dB
Line inputs (electronically balanced)
Frequency response: 10 Hz – 55 kHz, ±3 dB
THD+N: 0.005% at + 4 dBu, 1 kHz
Sensitivity range: -15 to 30 dBu
STEREO INPUT CHANNELS:
Line inputs (unbalanced)
Frequency response: 10 Hz – 55 kHz, ±3 dB
THD+N: 0.005% at +4 dBu, 1 kHz
IMPEDANCES:
Microphone inputs: 1.4 k Ω
Channel insert return: 2.5 k Ω
All other inputs: > 10 k Ω
2-Track outputs: 1 k Ω
All other outputs: 120 Ω
EQUALIZATION:
Mono: High-shelving: ±15 dB @ 12 kHz
Mid-peak/dip: ±15 dB (frequency range 100 Hz ~ 8 kHz)
Low-shelving: ±15 dB @ 80 Hz
Stereo: Hi-shelving: ±15 dB @ 12 kHz
Mid-peak/dip: ±15 dB @ 3 kHz
Mid-low-peak/dip: ±15 dB @ 500 Hz
Low-shelving:
±15 dB @ 80 Hz
Low-cut filter: 75 Hz, 18 dB/Oct.
DSP SECTION:
A/D & D/A converters/DSP Resolution: 24-bit
Effects: Reverbs: Hall, Room, Vocal, Plate
Delays: Mono, Stereo (max delay time: 650 ms)
Modulations: Chorus, Flanger, Reverb
Combinations: Reverb + Delay, Reverb + Chorus, Reverb + Flanger
Presets: 256
Controls: 16-position preset selector, 16-position variation selector, DSP mute switch,
peak LED indicator
MAIN MIX:
Noise (bus noise): Fader 0 dB, all input channels assigned & set to unity gain: -100 dBr (ref: +4 dBu)
Max output: +22 dBu balanced
Aux sends, max out: +22 dBu
ST SUB OUT: +22 dBu
POWER SUPPLY:
Main voltage: 100 VAC ~ 60 Hz, 120 VAC ~ 60 Hz, 230 VAC ~ 50 Hz, 240 VAC ~ 50 Hz
Power consumption: C-D Stereo Mode: 2 x 500 W @ 4 Ω (EIAJ), 2 x 340 W @ 4 Ω (RMS)
C-D Bridge Mode: 1000 W @ 8 Ω (EIAJ)
A-B Stereo Mode: 2 x 750 W @ 4 Ω (EIAJ), 2 x 520 W @ 4 Ω (RMS)
A-B Bridge Mode: 1500 W x 8 Ω (EIAJ)
Fuse: 115 V : 12 A; 230 V : 6.3 A
Main connection: Standard IEC receptacle
Inrush current at initial switch-on: 17.71 A
Inrush current after power supply interruption: 20.46 A
DIMENSIONS (W x D x H): 29" x 15.7" x 4.5" (710 mm x 565 mm x 145 mm)
WEIGHT:
35.9 lbs (16.3 kg)
* Specifications are subject to change without notice.
www.altoprofessional.com
MANUAL VERSION 1.1