Atlona AT HDVS RX - Manual (Page 3)

3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
Atlona HDVS recei ver box was designed to smooth the transition from analog to digital displays in
schools and businesses, allowing advanced HDMI display devices to be used with the many VGA
computers still in use. Many displays don’t support the resolutions and refresh rates typical of
VGA sources. In addition, the HDVS-RX is compatible with Atlona PoCc switchers and distribution
amplifiers with HDBaseT outputs and is a good solution when scaling is required for a specific
display.
When used with a matching HDVS-TX or HDVS-TX-WP, projector control is enabled. HDBaseT and
power over category cable (PoCc) allow signal and power over a single category cable, with RS-232
control capability.
Package Contents
Features
• 1 x AT-HDVS-RX
• 1 x 3.5mm to D-sub adapter
• 2 x Captive screw female connector (5 pin: audio, 2 pin: power)
• 1 x 24V DC captive screw power adapter
• 1 x User manual
• Scales incoming signals at a variety of common resolutions up to 1080p or 1920x1200
• Complete video control of brightness, contrast, saturation, hue, and more
• Extends common resolutions up to 1080p or 1920x1200 to distances as long as 230ft (70
meters)*
• Front panel on-screen menu control for ease of use
• 2-channel analog audio on balanced output to an amplifier (Ex. AT-PA100-G2)
• PoCc (Power over Category cable) sends power to compatible transmitters
ex. AT-HDVS-TX-WP or AT-HDVS-TX
• Firmware upgradable for easy field service through USB