Atlona AT HDVS RX - Manual (Page 6)

6
Menu Option Sub-Menu Option Adjust
OSD Position Left-Top, Right-Top, Right-Bottom, Left-Bottom, Center
Transparency 0 (transparent) to 15 (solid)
Info. Timer 5 to 100 seconds
Menu Timer 5 to 100 seconds
Info. Display Always On, Auto, or Always Off
Background Grey, Cyan, Magenta, or Yellow
Menu Back
Others In Auto Switch On or Off
Mirror-V On or Off
ASP Background Grey, Black
Display Mode DispSW AVon, DispSW AVSW, AV SW, Always On
ProJSW Mode 5 to 300 (increases by 5)
Standby (min.) 0 to 15
Menu Back
Information Source
Name
Product
Sink
Model
Native 1
Native 2
F/W
Menu Back
System Reset No
Yes
Menu Back
Menu Exit
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Note: Display Mode does a variety of changes, see below
DispSW AVon - Display switches on/off, source audio/video signal always on
DispSW AVSW - Display switches on/off, source audio/video signal switches on/off
AV SW - Display is always on, source audio/video signal switches on/off
Always On - Default, no function
ProJSW Mode: Used with a projector whose lamp cannot be turned on for up to 5 minutes after
being shut off. Keeps control in same state as projector. Match settings with lamp delay on
projector in 5 to 300 seconds. The LED will blink for the full amount of the delay time (ex. 40
seconds).
Standby (min.): Adjusts period of time before scaler goes into standby following loss of signal.
Default is 0 minutes