Denon AVR-5700 - Manual (Page 12)

12
Speaker system connections
• Connect the speaker terminals with the speakers making sure that like
polarities are matched ( < with < , > with > ). Mismatching of polarities
will result in weak central sound, unclear orientation of the various
instruments, and the sense of direction of the stereo being impaired.
• When making connections, take care that none of the individual conductors
of the speaker cord come in contact with adjacent terminals, with other
speaker cord conductors, or with the rear panel.
NOTE:
NEVER touch the speaker terminals when the power is on.
Doing so could result in electric shocks.
Speaker Impedance
• Speakers with an impedance of from 6 to 16 Ω /ohms can be connected for
use as front and center speakers.
• Be careful when using two pairs of surround speakers (A + B) at the same
time, since use of speakers with an impedance of 12 to 16 Ω /ohms will lead
to damage.
• Speakers with an impedance of 6 to 16 Ω /ohms can be connected for use
as surround speakers.
• The protector circuit may be activated if the set is played for long periods of
time at high volumes when speakers with an impedance lower than the
specified impedance are connected.
A+B
OUT
OUT
OUT
OUT
OUT
OUT
PREOUT
6 16
PHONO
FRONT
CENTER
EFECT
SURROUND
SIGNAL
GND CD
DVD
VDP
TV/ DBS
V.AUX
VCR-1
VCR-2
MD/
TAPE-1
TAPE-2
MONITOR SOURCE
MULTI
OUT-1
MONITOR
OUT-2
DVD
VDP
TV/ DBS
V.AUX
VCR-1
VCR-2
VCR-1
VCR-2
VCR-1
VCR-2
MD/
TAPE-1
TAPE-2
6CH EXT. IN
FR
SW
SR
ER
FL
C
SL
EL
8CH EXT. IN AUDIO VIDEO S-VIDEO DIGITAL
SUB
WOOFER
R L
R L
R L
R L Y C B
DVD TV/DBS
COMPONENT VIDEO
SPEAKER SYSTEMS
OPTICAL
COAXIAL DOLBY DIGITAL RF
OPTICAL-5
1 2 3
1 2 3
4
SWITCHED TOTAL 120W(1A.) MAX.
AC 120V 60Hz
AC OUTLETS
AC IN
FRONT
CENTER
R L
R L
SURROUND
SURROUND
SPEAKER
IMPEDANCE
FRONT,CENTER /
6 16 12 16
SURROUND / A OR B
MONITOR
ROOM TO ROOM
REMOTE CONTROL
C R Y C B C R Y C B C R
B
A
IN
IN IN
IN IN IN
IN
IN
LOOP
ANT.
A M
FM COAX.
75
ANTENNA TERMINALS
(L) (R)
(L) (R)
Connecting the speaker cords
1. Loosen by turning
counterclockwise.
2. Insert the cord. 3. Tighten by turning
clockwise.
Connecting banana plugs
Turn clockwise to tighten, then insert the
banana plug.
CENTER SPEAKER SYSTEM FRONT SPEAKER SYSTEMS SURROUND SPEAKER
SYSTEMS
• Precautions when
connecting speakers
If a speaker is placed near
a TV or video monitor, the
colors on the screen may
be disturbed by the
speaker’s magnetism. If
this should happen, move
the speaker away to a
position where it does not
have this effect.
Either tightly twist or terminate the core wires.
Connections
• When making connections, also refer to the operating instructions of the other components.
Connection jack for
subwoofer with built-in
amplifier (super woofer),
etc.