Denon AVR-5700 - Manual (Page 31)

31
“VCR” “TV”
A
1 (DVD)
2 (VDP)
3 (TUNER)
4 (TV/DBS)
5 (V. AUX)
6 (PHONO)
7 (VCR-1)
8 (CD)
9 (MD/TAPE-1)
—
HITACHI A
MITSUBISHI A
PANASONIC A
JVC (VICTOR) A
SONY A
PIONEER
TOSHIBA A
SANYO A
SHARP A
NEC A
—
HITACHI B
MITSUBISHI B
PANASONIC B
JVC (VICTOR) B
SONY B
—
TOSHIBA B
SANYO B
SHARP B
NEC B
—
—
MITSUBISHI C
PANASONIC C
JVC (VICTOR) C
SONY C
—
—
—
—
NEC C
B DIRECT STEREO EXT.IN
2 Preset codes set upon shipment from the factory and when reset
A
1 (DVD)
2 (VDP)
3 (TUNER)
4 (TV/DBS)
5 (V. AUX)
6 (PHONO)
7 (VCR-1)
8 (CD)
9 (MD/TAPE-1)
—
DENON/HITACHI
MITSUBISHI A
PANASONIC A
JVC (VICTOR)
SONY
PIONEER
TOSHIBA
SANYO
SHARP
NEC
—
—
MITSUBISHI B
PANASONIC B
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B DIRECT STEREO EXT.IN
NOTES:
• The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental operation, cover the remote control
unit’s transmitting window while setting the preset memory.
• Some models and years of manufacture of components of the manufacturers listed on Table 1 cannot be used.
• The signals stored at “learned” buttons have priority over the preset codes. If you wish to clear the “learned” signals, do so as described
on page 36.
• Some manufacturers use different types of remote control codes for their products. If the component does not operate when set to
remote codeset A, try setting to the B or C codesets.
(DIRECT) (STEREO) (EXT. IN) (DIRECT) (STEREO) (EXT. IN)
(VCR-2) (VCR-2)