Denon AVR-5700 - Manual (Page 43)

43
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This
adjustment can be performed with the system setup (see page 22) or from the remote control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the DOLBY SURROUND
and HOME THX CINEMA modes. The adjusted levels for the different modes are automatically stored in the memory.
1 Press the T. TONE button.
T.TONE
2 Test tones are output from the different speakers. Use the
channel volume adjust buttons to adjust so that the volume
of the test tones is the same for all the speakers.
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
PANEL
DISPLAY
ON SCREEN
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
1,3
2
3 After completing the adjustment, press the T. TONE button
again.
T.TONE
2
Test tone signals are not output to the EL and ER channels.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described
below.
1 Select the speaker whose level you want to adjust.
The channel switches as shown below each time the button
is pressed.
2 Adjust the level of the selected speaker.
2 The EL and ER channels can only be adjusted when
“6CH/8CH EXTERNAL INPUT” is selected.
10 SURROUND
FL 1 C 1 FR 1 SL 1 1 SR
SW 0 ER 0 EL 0 FADER 0
2 2
CH SELECT
ENTER
2
1
DVD
START LEARNED/TX
HOME THX CINEMA
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
PANEL
DISPLAY
ON SCREEN
DOLBY / DTS SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS V.AUX PHONO
VCR-1 CD MD / TAPE-1 CHANNEL
VCR-2 TAPE-2 MON TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MD LOCK DECK
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
RC-853
1 2 3
4
SET
A / B
CALL OFF
ENTER
ON / SOURCE
5 6
7 8 9
+10 0