BIXOLON SRP-330 - Manual (Page 5)

Rev. 1.05 - 5 -
SRP-330
■ Introduction
The SRP-330 Roll Printer is designed for use with electronic instruments such as system
ECR, POS, banking equipment, computer peripheral equipment, etc.
The main features of the printer are as follows:
1. High speed printing : 47.28
(1/6” Feed) lines per second.
2. Low noise thermal printing.
3. USB Port & RS-232(SRP-330COS/330COSDU), USB Port & Parallel(SRP-330COP),
USB Port & Ethernet(SRP-330COE)
4. The data buffer allows the unit to receive print data even during printing.
5. Peripheral units drive circuit enables control of external devices such as cash drawer.
6. Characters can be scaled up to 64 times compared to its original size.
7. Bar code printing is possible by using a bar code command.
8. Different print densities can be selected by DIP switches.
Please be sure to read the instruction in this manual carefully before using your new
SRP-330.
※ NOTE
The socket-outlet shall be near the equipment and it shall be easy accessible.
※ All specifications are subjected to change without notice.
This equipment is indoor use and all the communication hiring are limited to inside of the
building.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality
of all our products. In following, product specifications and/or user manual content may be
changed without prior notice.