Denon CDR-W1500 - Manual (Page 24)

ENGLISH
24
14 RELAY MODE
★ Various types of playback and recording can be performed through relay operation between the set’s CD and CD-R units.
★ There are three relay modes.
★ The set mode is stored in the memory, but the data may be cleared if the power is not turned on for 2 or 3 days.
• The mode switches as shown below each time the RELAY MODE button is pressed.
Relay mode
ª
ª
ª
• The disc in the CD unit and the one in the CD-R
unit are played one after the other.
• Programmed play and random play of the disc in
the CD unit and the one in the CD-R unit can be
performed as if the two discs were a single disc.
• The CD and CD-R units can be operated
independently.
• Either the CD or the CD-R unit can be operated.
Relay mode:
Mix mode:
Dual mode:
Normal mode:
ª
“Relay Play”
“Mix Play”
“Dual Play”
“Single Play”
8. Timer playback
• A separately sold audio timer can be used to start playback or recording at a specific time.
• Also refer to the operating instructions for the audio timer and amplifier.
• The program and relay modes can also be used.
(1) Connections
OPEN / CLOSE TIME TIME CLEAR INPUT
MENU 5 OPEN /CLOSE 5
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
PHONES PHONES LEVEL
MIN MAX
POWER ON OFF FINALIZE MULTI JOG 3 1 2 3 1 2 PLAY STOP PAUSE
HIGH NORMAL DUBBING 8 9 RELAY MODE
DISPLAY
SELECT TITLE / CHARACTER
PUSH
ENTER
8 9 PLAY STOP PAUSE
4 REC
- + REMOTE SENSOR
CDR-W1500 (this set)
Amplifier
Audio timer
AC 120 V/60 Hz power outlet
(2) Timer playback
OPEN / CLOSE
TIME TIME CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
PHONES PHONES LEVEL
MIN MAX
POWER ON OFF
FINALIZE
MULTI JOG
3 1 2 3 1 2
PLAY STOP PAUSE
HIGH NORMAL DUBBING 8 9
RELAY MODE
DISPLAY
SELECT TITLE / CHARACTER
PUSH ENTER
8 9
PLAY STOP PAUSE
4 REC
- +
REMOTE SENSOR
STOP PAUSE PLAY
2
4
3
7 8
5 6
1
9
10 + 10
REC
_ DUBBING _
NORMAL HIGH RELAY
MODE
CD CD-R
ENTER
MENU
8 9
3 2
6 7
PROG/DIRECT CALL
RANDOM
1 / ALL A - B
CHARACTER TIME TITLE
M M
CLEAR CLEAR
A ! " A ! "
J J
D # % D # % G & ' G & '
P P ,
Y Y V V : ; S S .
[ = ] [ = ] { { ? }
5 5
1
(Main unit)
(Remote control unit)
1 Turn on the power of the CDR-W1500 and the connected components.
3 Load the Disc for timer playback into the CDR-W1500.
4 Set the amplifier's input selector to “CD”.
5 Press the play button ( 1 PLAY).
• Play the disc to check the volume.
2 Perform the procedure at “Setup Method (10) Timer play mode setting” (Page 13) and make the timer playback on
setting.
6
Set the audio timer for the desired time.
• The power of the components connected to the audio timer turns off.
• When the set time is reached, the power of the various components turns on automatically and playback begins from
track one.
Select the deck to be operated.
• The settings for the program mode, random mode, relay mode, etc., are stored in the memory before the power is turned
off.
• If there is no disc in the CD side and a disc is loaded in the CD-R side:
Timer playback does not function when the relay mode is set to normal or dual.
Timer playback functions for the CD-R side when the relay mode is set to relay or mix.
NOTE:
• Recording, finalizing and editing are not possible in the relay or mix mode.