Denon CDR-W1500 - Manual (Page 25)

ENGLISH
25
2. Mix mode
★ In the mix mode, programmed play and random play of the disc in the CD unit and the one in the CD-R unit can be performed as
if the two discs were a single disc.
(1) Mix programmed playback
OPEN / CLOSE
TIME TIME CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
PHONES PHONES LEVEL
MIN MAX
POWER ON OFF
FINALIZE
MULTI JOG
3 1 2 3 1 2
PLAY STOP PAUSE
HIGH NORMAL DUBBING 8 9
RELAY MODE
DISPLAY
SELECT TITLE / CHARACTER
PUSH ENTER
8 9
PLAY STOP PAUSE
4 REC
- +
REMOTE SENSOR
STOP PAUSE PLAY
2
4
3
7 8
5 6
1
9
10 + 10
REC
_ DUBBING _
NORMAL HIGH RELAY
MODE
CD CD-R
ENTER
MENU
8 9
3 2
6 7
PROG/DIRECT CALL
RANDOM
DISPLAY SEL. FADER INPUT FINALIZE
1 / ALL A - B
CHARACTER TIME TITLE
B
REMOTE CONTROL UNIT RC-278
M M
CLEAR CLEAR
A ! " A ! "
J J
D # % D # % G & ' G & '
P P ,
Y Y V V : ; S S .
[ = ] [ = ] { { ? }
5 2
1 1
1 1 5
3
5
2
4
4
1 Load the discs you want to play in the CD and CD-R units.
2 Press the RELAY MODE button and select “Mix Play”.
• The “MIX” indicator lights.
3 Press the CD or CD-R unit’s PROG/DIRECT button on the remote control unit to set the program mode.
• The “PROG” indicator lights.
4
Follow the procedure at “Programmed playback” on Page 21 to program the tracks in the order in which you want to
play them.
• You can program tracks for both the CD and CD-R units by using the CD/CD-R selector switch on the remote control
unit to switch between them.
• Up to 30 tracks can be programmed.
5
Mix programmed playback starts when the CD or CD-R unit’s play button is pressed.
• The sound is output from the CD/CD-R output jacks.
• To quit the mix mode, press the relay mode button and select “Single Play”.
(Main unit)
(Remote control unit)
1. Relay play
★ With the relay play mode it is possible to play the disc in the CD side and the one in the CD-R side, relaying between them.
★ The programmed play and random play modes can be preset for the discs in the CD and CD-R units.
OPEN / CLOSE
TIME TIME CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
PHONES PHONES LEVEL
MIN MAX
POWER ON OFF
FINALIZE
MULTI JOG
3 1 2 3 1 2
PLAY STOP PAUSE
HIGH NORMAL DUBBING 8 9
RELAY MODE
DISPLAY
SELECT TITLE / CHARACTER
PUSH ENTER
8 9
PLAY STOP PAUSE
4 REC
- +
REMOTE SENSOR
STOP PAUSE PLAY
2
4
3
7 8
5 6
1
9
10 + 10
REC
_ DUBBING _
NORMAL HIGH RELAY
MODE
CD CD-R
ENTER
MENU
8 9
3 2
6 7
PROG/DIRECT CALL
RANDOM
DISPLAY SEL. FADER INPUT FINALIZE
1 / ALL A - B
CHARACTER TIME TITLE
B
M M
CLEAR CLEAR
A ! " A ! "
J J
D # % D # % G & ' G & '
P P ,
Y Y V V : ; S S .
[ = ] [ = ] { { ? }
4 2
1 1
1 1 3
4
2
1 Load the discs you want to play in the CD and CD-R units.
2 Press the RELAY MODE button and select “Relay Play”.
• The “RELAY” indicator lights.
3
Use the CD or CD-R section repeat 1/ALL button on the remote control unit to turn the repeat mode on or off.
• The 1-track repeat mode cannot be set in the relay mode.
• The relay operation is performed as shown below according to the combination of the relay and repeat modes:
4
Relay play starts when the CD unit’s play button is pressed.
• The sound is output from the CD/CD-R output jacks.
• To quit the relay mode, press the relay mode button and select “Single Play”.
• The disc in the side that is not operating can be replaced during relay playback.
Repeat mode Relay operation
Repeat on: “REPEAT”
indicator lit
Repeat off CD side playback CD-R side playback Stop 1 1
CD side playback CD-R side playback 1 1
(Main unit)
(Remote control unit)
Select the CD side.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.