Casella CEL Software for Heat Stress Monitor HSM100 - Manual (Page 8)

HEAT STRESS MONITOR
Handbook No. HB3215-05
Page 8 of 16
12.1 Text box
Used to display a fixed text message as shown below:-
12.2 Date box / Time box
Use to display Time and Date based on the P.Cs internal clock.
12.3 Value box
Use to display a data channel value together with top and bottom labels as shown below.
12.4 Bitmap box
Used to display a 16 Colour windows bitmap image file. Commonly used to display
company logos, site maps, warning symbols etc.
12.5 Multistate box
Multi-state images are created using a single bit map which is subdivided horizontally into blocks
of equal width. The displayed image section is dependent upon the value of a data channel. e.g.
In the battery condition example above;- the number of images should be set to 2. The 'steps'
value is set to 0.5. The 'Battery Low' image will be displayed for values less than or equal to 0.5,
the 'Battery O.K' image will be shown for values above 0.5. The battery status value contained
within the HSM100 message is 'L' for a Low discharged battery and 'H' for a good High battery.
The software automatically converts the letter 'H' to a value 1 and the letter 'L' to a value 0.