159263_21.0 guide_c3, Making the remote work with your receiver – Dish Network 21.0 User Manual
Page 5
C-3
Quick Setup
Confirm that your remote operates your
receiver by pressing remote buttons. If
your remote has a blue number 2 key, you
may need to go to your remote TV2 location to
confirm your remote operates your receiver.
If this is not working, go back to
step
5
.
Making the Remote Work
With Your Receiver
3
6
RECORD
Turn your receiver and
TV on, and press
SYSTEM INFO on the
front of the receiver.
Confirm that you
see the System
Information screen.
Press RECORD on
your remote. The remote
address will probably
change on the screen.
3
2
1
5
4
REMOTE
ANTENNA
Verify the UHF antenna
is installed on the back
of the receiver. Verify
the UHF/IR Switch
is set to UHF.
If you installed this key,
continue with
step
2
on this page.
If you installed this
key, go to
page
14
inside this guide.