COMMELL P4LA - Manual (Page 28)

P4LA User’s Manual Introduction
Power and Fan Installation 28
2.13 <Power and Fan Installation>
The P4LA provides a standard ATX power supply with 24-pin ATX connector and additional
12V connector, and the board provides one 4-pin fan connectors supporting smart fan for
CPU cooler and two 3-pin cooler fan connectors for system and Northbridge chip. The 8-pin
additional power connector is necessary for CPU powering; please connect this well before
you finishing the system setup.
1
3
3
CN_12V
1 12
13 24
ATX
1
CPUFAN
1
4
SYSFAN
1 4
NBFAN
8
2