COMMELL P4LA User Manual
Page 9
P4LA User’s Manual Introduction
Product Specification
9
Ethernet Interface
Chipset
10/100/1000MT LAN interface with Marvell E8053
Type
10Base-T / 100Base-TX/1000Base-T,
auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector
one External RJ45 connectors with LED on rear I/O panel
Audio Interface
Chipset Intel® ICH7R with Realtek® ALC880 codec
Intel High Definition Audio compliance
Interface
7.1 channels sound output
Connector
External Audio phone jack for Line-out, Line-in, MIC-in,
Surround, Center and Backsurround
Onboard audio connector with pin header (built-in amplifier for
speaker out)
Onboard CD-IN and S/PDIF connector
Expansive Interface
PCI-Express One
x16
PCI-Express slot (compatible with x1 slot)
One x4 PCI-Express slot
One x1 PCI-Express slot
Up to 8GB/s of transfer bandwidth
Power supply: +3.3V, +12V
PCI
Four-PCI slot (32-bit, 33MHz)
Power supply: +3.3V, +5V
ISA
One ISA slot
Power and Environment
Power
Requirement
Standard ATX 24-pin (20-pin is compatible) power supply
Additional +12V
8-pin(4-pin is compatible) power connector
Dimension
307mm x 244mm (L x W)
Temperature
Operating within 0 ~ 60
P
o
P
C (32 ~ 140
P
o
P
F)
Storage within -20 ~ 85
P
o
P
C (-4 ~ 185
P
o
P
F)
Ordering Code
P4LA
Support Intel Pentium 4 LGA775 with DDRII, Onboard VGA, One
Marvell Gigabit LAN ,8 x USB2.0, Realtek ALC880 HD Audio, 6 x
COM Ports, GPIO, SATA, CF and ISA slot.
The specifications may be different as the actual production.
For further product information please visit the website at
TU
http://www.commell.com.tw
UT