SoundMax SM-CDM1053 - Manual (Page 11)

11
General operations
Power button
Press any button (except OPEN button) to switch the unit on. The display will show a message “WELCOME”.
Press and hold POWER button to switch the unit off.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status you set.
Volume control
Rotate VOL knob on the faceplate. The larger the number shown on the display is, the higher the volume
level is.
Sound settings
Press SELECT button shortly and repeatedly to select a mode: VOL => BAS => TRE => BAL => FAD. Rotate
VOL knob to adjust each mode.
VOLUME: 00, 02,......, 47
BASS/TREBLE: -7, -5,......, 0, +1, +2,......+5, +7
BALANCE: 10L,......, 10R
FADER: 10R,...., 10F
Note: When DSP is on, bass and treble adjustment is not available.
Caution: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the
last display mode of radio or disc playback mode.
Mode selection
Press MODE button to cycle the play mode: AUX => TUNER => DISC.
Note: DISC mode will only show on the display when a disc is inserted into the unit.
Clock setting
Press DISP button until clock is shown, press the DISP button and hold for 2 seconds. Time will start blinking.
Rotate the VOL knob clockwise to adjust hour. Rotate the VOL knob anticlockwise to adjust minute. Press
DISP button again to save setting.