SoundMax SM-CDM1053 - Manual (Page 17)

17
Disc operations
Loading/Eject a disc
Open the front panel. Insert the disc with the printed side facing upward into the slot. Close the panel.
The CD will play automatically.
Open the front panel and press EJECT button to eject the disc. If the disc is not removed from the slot
within several seconds, it will automatically be loaded into the slot again. When the disc is ejected and
removed, the unit will automatically switch to radio mode.
Pausing playback
To ensure good system performance, wait until the unit finishes reading the disc information before
proceeding. Press 1/PAU button to pause the playback. Press again to resume the playback.
Playing the previous/next track
During playback press NEXT or PREVIOUS buttons to play next or previous track correspondingly.
Fast forward and backward playback
Press and hold NEXT or PREVIOUS buttons on the panel or RC to fast forward or reverse correspondingly.
Release the button when the needed playback point of the track is found.
Intro playback
You can play the beginning of every track for several seconds in sequence. Press 2/INT button to start intro
play. Press again to cancel.
Repeat playback
During disc playback, press 3/RPT button to repeat the current track playback. Press again to cancel.
Random playback
During disc playback, press 4/RDM button to start random playback of the tracks. Press again to cancel.
10 track Up/Down function (for MP3, WMA)
Press 6 button to advance 10 tracks at a time. Press 5 button to go back 10 tracks at a time.