CONTA-CLIP SMS-MULTI I/O - Manual (Page 25)

SMS-MULTI-IO
- 24 -
When a user defined name is given to an output it can be addressed by putting the name between
asterisks. E.g. an output is called ‘motor’ you read the value by sending
r* r* r* r*motor**** . The module
answers: ‘status motor=xxxx’
NOTE: To receive a user defined confirmation message from a non user defined output name the user
has to read the output by sending:
r* r* r* r*a aa ao o o on n n n**** .
5.3 5.3 5.3 5.3
Universal Input
Universal Input Universal Input Universal Inputssss
The SMS-MULTI-IO has 8 universal inputs which can individual be set to:
•
Analog input
•
Digital input (default)
•
RTD input
The selected button represents the chosen function and is set after uploading. In the following
example UI1 is set as a digital input:
5.3.1
5.3.1 5.3.1 5.3.1 Readin
Readin Readin Reading g g g from from from from multiple universal input multiple universal input multiple universal input multiple universal inputssss
To read all universal inputs send the default message: rmui rmui rmui rmui
The module sends a status message with the input states: ‘read UI 1=xxxx, UI 2=xxxx, …. UI 8=xxxx’. UI
will be replaced by the configured input type: AI, DI or RTD.
5.3.2
5.3.2 5.3.2 5.3.2 Select receivers Select receivers Select receivers Select receivers
Each UI is automatically provided with the selected users from the settings tab. In each UI tab users
can be de-selected so only a selective group of users receive messages from an individual UI.