CUE Wireless Touch Panel - Manual (Page 12)

12
Wireless Touch Panel | User Manual | Battery and Charging
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Wall Charging Station
Wall Charging Station 7 is wall station for airCIUE-7 and it has to be ordered separately. Installation is
provided on the wall without back box.
The wall station uses power supply 12 VDC on 2-pin Phoenix type connector. Connect power supply 2-pin
cable connector to the connector located on the rear side of wall charging station. Then attach power supply
to a power outlet.
Charging contacts
Power Supply
2-pin connector
Then put airCUE-7 to the tabletop charging station. Touch panel is secured by two magnets.
Wall
Standard wall box
Wall charging station