CUE Wireless Touch Panel - Manual (Page 20)

20
Wireless Touch Panel | User Manual | On Screen Display
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
IP Settings
192.168.1.128
255.255.255.0
192.168.1.1
This page is used for communication parameters setting.
The touch panel uses standard internet protocol (IP)
communication parameters. Certain parameters can
be reset by the user. On start up, this page will display
current IP address. Carefully note this addressing
information (and any changes you elect to make to
the IP address, subnet mask, or default gateway).
This information must be entered into the Cue Visual
Composer program written for your specific application.
For control systems with more than one unit, a unique IP
address must be given to each CUEunit.
For setting select appropriate field using Edit button and
then use numeric keypad.
Be sure to click the Apply button for any changes to
become effective.
Date/Time
19/04/2011
17:01:25
GMT+01:00 CET/CEST
This page is used for setting Date/Time parameters.
The current date and time can be set. For setting please
select appropriate field using Edit button and then use
numeric keypad.
The time zone box can be selected to enter from the list
activated by button Edit.
Rest of the page is used for synchronization of the
CUEunit’s date and time with an internet clock. Select Yes
for Use Internet clock. Next, enter the IP addresses (or
complete address name) of the primary and secondary
NTP servers.
Applications
TestApp_TouchPanel1.cvca
DemoApp_TouchPanel1.cvca
This screen is used for selection, start and stop of
uploaded applications. All uploaded applications are
listed on this page.
Select application and press button Start. A “running
flag” denotes the active application. Active application
starts automatically after switch on the unit. The running
application can be stopped via the Stop button.
Files are uploaded from a personal computer to the touch
panel using Cue Visual Composer software or using
Admin Web.