Z5048 flying pin, 10 mm, Product description, Safety instructions – d&b Z5048 User Manual
Page 3
Table of content
1. Product description..............................................................................................3
2. Safety instructions................................................................................................3
3. Load safety information.....................................................................................4
4. Assembly................................................................................................................4
5. Application.............................................................................................................4
5.1. M2 Stagemonitor.......................................................................................4
5.2. Q-Series loudspeaker...............................................................................4
1.
Product description
Fig. 1: Z5048 Flying pin, 10 mm
The Z5048 Flying pin, 10 mm enables single M2 or Q-TOP (Q7/Q10)
cabinets to be flown either horizontally or vertically.
The cabinets are equipped with two precision mounting sockets, each
accepting a single Flying pin, 10 mm.
Minumum two or up to four Z5048 Flying pins will be required
depending on the method of deployment.
2.
Safety instructions
LOCK PIN
SECURELY
BEFORE LIFTING
CAUTION
ONLY UNLOCK FOR
DISASSEMBLY ON
GROUND
WARNING!
Installation should only be carried out by fully trained personel. There
are certain rules for installation that must be complied with.
It is the responsibility of the person installing the assembly to ensure that
the structure being attached to is suitable for the intended use.
The Z5048 Flying pin, 10 mm must only be used in conjunction with the
d&b loudspeaker cabinets which are equipped with a socket to accept
the Flying pin, 10 mm.
The Z5048 Flying pins and the sockets in the cabinets must be inspected
before use for faults (release mechanism function, deformation or
corrosion, missing ball bearings, or damage to the mounting sockets or
cabinet). A cabinet with damaged mounting sockets must not be flown
under any circumstances, whilst damaged Flying pins must be withdrawn
from use immediately.
The Z5048 Flying pins are not designed to be rotated in a mounting
socket under load conditions. As a loudspeaker cabinet will rotate if
picked up from one point, a minimum of two flying pins should always
be used to fly a single cabinet.
Ensure all locking pin is inserted and locked securely before lifting the
cabinet.
The locking pins should only be unlocked for disassembly on the ground.
Secondary safeties must always be provided and used when flying or
fixing loudspeaker loads overhead.
Z5048 Mounting instructions
(2.1EN)
Page 3 of 4