d&b Z5048 - Manual (Page 4)

3. Load safety information
WARNING! The maximum permitted working load limit (WLL) of the Z5048 Flying
pin, 10 mm is 105 kg/231.5 lb
4. Assembly
[B]
[B]
Fig. 2: Z5048 Assembly
Pressing the button [B] releases the locking mechanism allowing
insertion and retraction to and from the socket of the cabinet.
Releasing the button [B] after the pin is fixed in place the locking
mechanism will be locked.
5. Application
5.1. M2 Stagemonitor
WARNING! On no account should an additional M2 cabinet be
suspended from the M2 Flying pins of another.
The Z5048 Flying pin allows an M2 stage monitor to be flown quickly
and easily, either vertically (e.g. as sidefill), or horizontally (e.g. under a
stage fitted with grill apertures).
The M2 cabinet is equipped with two precision mounting sockets on
each side, each accepting a single M2 Flying pin.
5.2. Q-Series loudspeaker
Fig. 3:
Fig. 4:
Fig. 5:
The Z5048 Flying pin allows either the vertical or horizontal suspension
of a single Q-TOP cabinet.
In the case of a single cabinet to be suspended vertically one flying pin
each can be attached to the centre sockets at the up side of the front
grill and the back of the cabinet (see Fig. 3).
In the case of a single cabinet to be suspended horizontally two flying
pins each to the left and right panel of the cabinet can be inserted to
the centre sockets at the front grill and the back of the cabinet (see Fig.
4).
Alternatively two flying pins can be inserted to the centre socket at the
front grill and a third flying pin to the additional socket in the centre of
the rear panel (see Fig. 5).
d&b audiotechnik GmbH, Eugen-Adolff-Str. 134, D-71522 Backnang, Germany, Phone +49-7191-9669-0, Fax +49-7191-95 00 00