d&b Z5398 YP Horizontal bracket - Manual (Page 4)

1.1. Scope of supply and weight
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1 Z5398 YP Horizontal bracket [1]
Including:
4 Hex head bolt M10 x 25 [2]
4 Spring washer [3]
4 U washer [4]
1 D2818.EN .01 Z5398 Mounting instructions
Weight 2 kg (4.4 lb)
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, these must be withdrawn from
use immediately.
Load safety information
The Z5398 YP Horizontal bracket is designed to support one YP
loudspeaker (Yi7P or Yi10P).
No additional loads must be added.
1.3. Intended use
The d&b Z5398 YP Horizontal bracket must only be used in
conjunction with d&b YP or YiP cabinets (Y7P/Yi7P or Y10P/
Yi10P) as described in these mounting instructions.
The bracket can be:
– directly mounted to walls.
– directly mounted to ceilings or other suitable surfaces.
– horizontally flown from overhead bars or trusses with a tube
diameter bewtween 40 mm to 70 mm (1.5" to 2.75") using
the Z5010 TV spigot with fixing plate in conjunction with the
Z5012 Pipe clamp.
Note: Refer to the specific mounting instructions for assembly
and operation of these accessories.
Scope of supply
1. Z5398 YP Horizontal bracket
d&b Z5398 Mounting instructions 1.1 en 4