Doremi DCP-2000 User Manual
Page 4
Advertising
b) For chassis with a black front panel ONLY (Chassis OEM-DOR-315), put the
cables above the top foam assembly according to the illustration below:
Figure 7: DCP-2000 Black Front Panel Packaging
6. Close the inner box and the outer box.
7. Seal the outer box with at least four pieces of large and strong tape according to the
illustration below:
Figure 8: DCP-2000 Box – Top Side, Tape Location
8. Make sure the tape on the bottom of the box is still strong enough – otherwise, put the
same kind of four pieces of tape as for the top side.
9. The unit is now ready to be transported or shipped.
D2K.DP.000468.DRM
Page 4
Version 1.1
Doremi Cinema LLC
First piece of tape
Second piece of tape
Third piece of tape
Fourth piece of
tape
Top foam assembly
Cables
Advertising