Future Automation AL965 - Manual (Page 10)

In
st
al
la
ti
o
n
:
S
ta
ge
5
AL965 Actuator Lift
Page 9 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Aligning the screen
Align the top of the screen so that it’s just
below the underside of the lid when the
mechanism is in the IN position
When the lift is fully down the screen needs
to be just under the top lid
To change the height of the screen plate
loosen the 4 nuts so the locking strips can
run freely. Move the screen plate up or
down to the desired height then tighten the
nuts back up


Mounting slots for
adjusting the screen
plate height
Locking strips Nuts x8