Future Automation AL965 - Manual (Page 12)

In
st
al
la
ti
o
n
:
S
ta
ge
7
Page 11 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
AL965 Actuator Lift
Adjusting the push bars
Make sure that when the mechanism opens the push bar is in
contact with the flap at all times and that the flap does not all
past 90 degrees.
-Loosen the 2 screws shown
above to move the push bar up
and down
-Adjust the push bar so when
the screen is in the lN position
the push bar is just short from
touching the underside of the lid




Approx
5mm [0. 2”]