Future Automation PS60 - Manual (Page 12)

In
st
al
la
ti
o
n
:
S
ta
ge
7
Page 11 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PS60 - Plasma Swivel Bracket
Fixing the Screen & Uprights to the Frame
With the bracket sitting flat against the wall, hook the
screen uprights over the cross members. Make sure
to get the screen symmetrical about the bracket and
then lock into position by tightening the set screws on
the uprights
Usage-
Take care when using the PS60 bracket.
If there ever seems to be a fault of some
kind with the mechanism, please consult
Future Automation immediately.
Do not force, or apply excessive loads to
any part of the mechanism.
If the wall bracket is loose when operating you
can add more friction by adjusting the pair of
grub screws located in the sliding collar.
Grub screw
both sides
Sliding collar