Future Automation PS60 - Manual (Page 6)

In
st
al
la
ti
o
n
:
S
ta
ge
1
Page 5 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PS60 - Plasma Swivel Bracket
Before You Start
Prior to installation check the following:
-The product is in good condition
-No damage to any parts
-The bracket is in the closed position
Hook uprights over
cross members
Tighten set screw
to lock in place
Frame Construction
Construct the frame around the PS bracket as shown above. Over lap the uprights
and secure in place by tightening the 4 set screws in the hook details.