Future Automation PS60 - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PS60 - Plasma Swivel Bracket
Mounting the uprights to the screen
If the screen has mounting points which are recessed, it will be necessary to
use some of the provided spacers, in order to attach the uprights to the screen.
It is also recommended that a minimum of 15mm of bolt thread is screwed into
the case of the screen, without bottoming out.
It may be necessary to use spacers even if
the mounting points are not recessed. For
example, if the back panel is not flat, or to
allow for easier electrical connection.
It is also recommended that a
minimum of 15mm of bolt thread
is screwed into the case of the
screen, without bottoming out.