ILUMINARC LΩGIC™ 1X36 - Manual (Page 19)

Operation
L
ΩGIC™ 1X36 User Manual Rev. 08
15
Programming (SpectraWhite™ Mode)
Refer to the Menu Options section on page 20 to learn how the menu options relate to each
other. The Menu Options section has a Main level and a variable number of programming
levels for each option.
To go to an option in the Main level, press <MENU> repeatedly until the option shows on the
display. Press <SET> to select it. This will take you to the first programming level for that
option.
To select an option or value within the current programming level press <UP> or <DOWN>
until it shows on the display. Press <SET> to accept it. In this case, if there is another
programming level, you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
Mode Selection
1. Go to MENU>SET.
2. Select GO WHITE.
3. Select YES?
DMX Addressing
1. Go to MENU >ADDRES.
2. Select the starting address [001~512].
3. Go to MENU >RUN.
4. Select DMX.
DMX Personality
1. Go to MENU>PERS and select any DMX personality.
2. Make sure to rearrange the DMX addresses of all products in the current DMX
universe to avoid address overlapping.