ILUMINARC LΩGIC™ 4X36 - Manual (Page 15)

Operation
LΩGIC™ 4X36 User Manual (Rev. 10)
11
4. Operation
When running
the product
using a DMX
controller, make sure that
the Menu>Run is set to
DMX.
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<SET>
Enables the currently displayed menu or sets the currently selected value in
to the current function
<UP>
Navigates upwards through the menu list and increases the numeric value
when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric
value when in a function
Control Options
You can set the
LΩGIC™ 4X36 start address in the 001~512 DMX range. This allows for
the control of up to 34 products in the 15-channel RGB+LINE+DMS personality.
Programming (RGB Mode)
Refer to the Menu Options section to learn how the menu options relate to each other. The
Menu Options section has a Main level and a variable number of programming levels for
each option.
· To go to an option in the Main level, press <MENU> repeatedly until the option
shows on the display. Press <SET> to select. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option or value is displayed. Press <SET> to accept. If there is
another programming level, you will see that level’s first option. If not, you will see
the selected value.
· To exit to the previous menu level, press <MENU>.
Mode Selection
1. Go to MENU>SETTINGS.
2. Select GOTO RGB.
3. Select YES?
DMX Addressing
1. Go to MENU>DMX ADDRESS.
2. Select the starting address [001~512].
3. Go to MENU >OPERATION.
4. Select DMX.
DMX Personality
1. Go to MENU>PERSONALITY and select any DMX personality.
2. Make sure to rearrange the DMX addresses of all products in the current DMX universe
to avoid address overlapping.