ILUMINARC LΩGIC™ 4X36 - Manual (Page 18)

Operation
14
LΩGIC™ 4X36 User Manual (Rev. 10)
Programming (SpectraWhite™ Mode)
Refer to the Menu Options section on page 20 to learn how the menu options relate to each
other. The Menu Options section has a Main level and a variable number of programming
levels for each option.
· To go to an option in the Main level, press <MENU> repeatedly until the option
shows on the display. Press <SET> to select it. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level press <UP> or
<DOWN> until it shows on the display. Press <SET> to accept it. In this case, if
there is another programming level, you will see its first option. Otherwise, you
will see the selected value.
· To exit to the previous menu level, press <MENU>.
Mode Selection
1. Go to MENU>SETTINGS.
2. Select GOTOWHITE.
3. Select YES?
DMX Addressing
1. Go to MENU >DMX ADDRESS.
2. Select the starting address [001~512].
3. Go to MENU >OPERATION.
4. Select DMX.
DMX Personality
1. Go to MENU>PERSONALITY and select any DMX personality.
2. Make sure to rearrange the DMX addresses of all products in the current DMX universe
to avoid address overlapping.
Master/Slave
On the Master product:
1. Go to MENU>OPERATION and select DMX.
2. Go to MENU>MOOD.
3. Select COOL, WARM, or NATURAL.
4. Select DIM[000~255]
On each of the Slave products:
1. Go to MENU>OPERATION and select SLAVE.
The slave products will follow the program played by the Master.
Static Colors
1. Go to MENU>PLAYSTATIC.
2. Select an output line L [1~4].
3. Select a color or effect COOL, WARM, DIMMER, and STROBE.
4. Select a color value [000~255] or a strobe frequency [00~20]
Auto Play
1. Go to MENU>MOOD.
2. Select a program COOL, WARM, or NATURAL.
3. Select DIM [000~255].