ILUMINARC Colorist™ Line 12Qa - Manual (Page 14)

Operation
10 Colorist™ Line 12Qa User Manual Rev. 2
4. Operation
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the
currently selected value in to the current function
<UP>
Navigates upwards through the menu list and
increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and
decreases the numeric value when in a function
Control Options
You can set the Colorist™ Line 12Qa start address in the 001–512 DMX range. This allows
for the control of up to 9 products in the 53-channel 53CH personality.
DMX Programming
Carry out all the programming procedures indicated below from the control panel. Refer to the
Menu Map to learn how the menu options relate to each other.
Use <ENTER> and <MENU> to change levels in the Menu Map. Use <UP> and <DOWN>
to select from among the Menu Map options.
1. From the Main Level select any DMX personality 4-CH, 6-CH, 10CH, 48CH, and
53CH.
2. Go to d and select a starting DMX address (1–512).
P 01–10 are fully
configured
programs and
cannot be
modified.
Static Colors
1. Go to C--.
2. Select a color (C 1–15).
Auto Play
1. Go to P--.
2. Select an auto program (P 0–13).
3. Go to S--.
4. Select an auto program speed (S 1–100).
Custom Color
1. Go to U--.
2. Select a color (r, g, b, or A).
3. Configure the color value (0–255).
4. Repeat steps 4 and 5 for the other colors.