About this guide, Disclaimer, Safety notes – ILUMINARC Colorist™ Line 12Qa User Manual
Page 2
Colorist™ Line 12Qa QRG
EN
2
About this
Guide
The Colorist™ Line 12Qa Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
DMX values. Download the User Manual from
for
more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
· DO NOT open this product. It contains no user-serviceable parts.
· DO NOT look at the light source when the product is on.
· To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
· CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing
a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
· CAUTION: This product’s housing is hot when lights are operating.
· Mount this product in a location with adequate ventilation, at least
50 cm (20 in) from adjacent surfaces.
· In outdoor environments, the product aperture must not hang between
171° and 189° on the vertical axis where 0° is straight up.
· DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
· DO NOT submerge the product (IP65). Regular outdoor operation is
fine.
· Not for permanent outdoor installation in locations with extreme
environmental conditions. This includes, but is not limited to:
o
Exposure to a marine/saline environment (within 3 miles
of a saltwater body of water).
o
Where the normal high or low temperatures of the location
exceed the temperature ranges in this manual.
o
Locations that are prone to flooding or being buried in
snow.
o
Other areas where the product will be subject to extreme
radiation or caustic substances.