ILUMINARC Ilumipanel™ 180 IP - Manual (Page 13)

Installation
Ilumipanel 180 IP Optic 15/30 RGB User Manual Rev. 3 9
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The Ilumipanel 180 IP Optic 15/30 RGB can operate with a standard DMX controller, the
ILUMICON controller, or the ILUMICODE ADDRESSER. The sections below provide
information on how to connect these products to the corresponding controllers. The instructions
to operate these products with each of the above controllers are in
Operation .
DMX Controller
The Ilumipanel 180 IP Optic 15/30 RGB can work with a standard DMX controller. The
channel assignments will depend on the chosen personality (see the corresponding
Menu
Map section) and the DMX address assigned to each product (see the Programming
section).
The figure below illustrates how to connect the DMX controller to the Ilumipanel 180 IP
Optic 15/30 RGB.