KLING & FREITAG K&F TOPAS User Manual
Page 32
User's manual
System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014
Version 3.1
Page 32 of 65
Channel 1:
•
RMS-Level: Audio signal level
•
Limiter: status notification of the peak limiter (PK), RMS limiter (RMS) and current (CUR)
•
Clipping: status notification of the analogue input (ADC) and the amplifier module
(AMP)
•
Channel 1: toggle between 'On' (open channel) and 'mute' (channel off)
•
Input-Routing: Switches between 'Input 1', 'Input 2' and 'Monomix(-6dB)'
•
Delay: Input in ms, max. 2000 ms
•
invert Phase: invert Phase 'on' or 'off'
•
Gain: Enter gain in dB, this value is the volume level of the amplifier itself.
The total gain of the corresponding TOPAS is the sum of 'Group Gain' and 'Gain'.
•
Group Gain: Enter gain in dB, this value will be specified by the remote software in the
future.
•
Filter: Possibilities to set four free selectable filters, 'Type', 'F[Hz]', 'Q', G[dB] and
activation of this setting
Channel 2 has the same settings as channel 1.
Further information about filters and their functionality, see page 57.