NEXCOM NEX 611 - Manual (Page 36)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 25
Chapter 2: Installation
NEX 611 User Manual
How to Hot Plug/ Hot Swap a HDD:
Please follow the instructions below to process Hot Plug/ Hot Swap.
Improper procedures will cause the HDD damage and data loss.
Connect the SATA 15-pin
power cable connector’s
(Black) end to the HDD. Connect the SATA data
cable to the HDD.
Please connect the SATA power
cable’s 1x4-pin end (White)
to the power supply’s 1x4-pin
cable. Connect the SATA data
cable to the motherboard’s
SATA connector.
SATA power cable
1x4-pin power
connector (White)
How to Hot Unplug/ Hot Swap a HDD:
Please follow the instructions below to process Hot Unplug/ Hot Swap.
Improper procedures will cause the HDD damage and data loss.
Unplug the SATA data cable from the HDD’s side.
Unplug the SATA 15-pin power cable connector (Black) from the
HDD's side.
Step 1 Step 1
Step 2
Step 2
Step 3 Step 4