NEXCOM NEX 611 - Manual (Page 46)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 35
Chapter 3: Uefi Setup Utility
NEX 611 User Manual
3.3.7 USB Configuration
USB 2.0 Controller
Use this to enable or disable the USB 2.0 controller.
Legacy USB Support
Use this to select legacy support for USB devices. There are four configu-
ration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only]. The
default value is [Enabled]. Please refer to the descriptions below for details
of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to be used under legacy OS and
UEFI setup when [Disabled] is selected. If you have USB compatibility is-
sues, it is recommended to select [Disabled] to enter the OS.
[UEFI Setup Only] - USB devices are allowed to be used only under UEFI
setup and Windows / Linux OS.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save & Exit
F12: Print Screen
ESC: Exit
To enable or disable USB 2.0
Controller. USB 2.0 Controller
Legacy USB Support
[Enabled]
[Enabled]