Hapter, Ystem, Etup – NEXCOM NISE 101 User Manual
Page 38
Advertising

Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved.
25
Chapter 3: System Setup
NISE 101 User Manual
C
hapter
3: S
yStem
S
etup
Removing the Chassis Cover
2. Lift up the cover and remove it from the chassis.
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
This chapter will guide you on installing the SODIMM, SATA drive and
CompactFlash card. You need to remove the bottom cover to access the
SODIMM socket, SATA cables and CompactFlash socket.
1. With the bottom side of the chassis facing up, remove the mounting
screws of the bottom cover and then put them in a safe place for later
use.
Advertising